HOME > Products
탁상용 Lab Proto type. 01005 실장 가능. Solder Dispenser
상품명 [Pick and Place]소형
281
Solder Dispense
가격 01005 실장 Dispenser 기능
+ Bulk 자재 자동인식
+ BS281 2 실장
+ BS281 솔더 디스펜셔_ Bond
+ BS281 Short tape 작업
+ BS281 동영상
+ BS 281 catalog_E
 

 

본 장비는 다 기능. 고정밀도 기능 Lab. Small Multi SMD Assembly을 위한 장비 입니다.  Short tape. Bulk. Solder Dispenser 등 다양한 기능을 선택 사용 할 수 있습니다.   소량 다품종 혹은 학교. 산학연 관련 업종에 효율적으로 사용 할 수 있는 장비 입니다.

 

장비의 응용을 위하여 Application을 참고하시면 보다 유익한 응용 사례을 활용

할 수 있습니다.

 

누구나 쉽게 장비 운영을 숙지 가능하며, 원격 유지보수 기능이 있어 장비문제 시 실시간 대응이 가능합니다.  Solder Dispenser을 장착가능하며, Stencil Print 작업 없이 solder paste 정량 토출을 통하여 보다 빠른 능율적 적업을 할 수 있습니다.

 

 적용범위 :   연구 개발 . 소량 -품종 생산 업체 적합

                    64 이하의 부품 작업.  Smalles chip. Connector.LED 실장 공정 연구.개발. Q.C &        학교 기타  작업 공정.

 

 

AUTOTRONIK  281 model is especially designed for small volume batch sizes.

This model features vision processing and head-mounted camera for non-contact “Vision on the Fly” alignment. It assures high-precision placement of a full range of SMDs, from the smallest 0201 devices through CSPs, µBGAs, flip-chips, ultra-fine pitch 0.5mm for QFPs, even odd-form components.

 

Optional Bottom Vision Camera is used for large components up to 150 x 100 mm and devices with alignment features on their bottom side. With additional Bottom Vision Camera, the alignment of 01005 components is possible.

 

Optional Feeders and Accessories allow a wide variety of configurations for Full and Partial Reels of Tape, Strips of Cut Tape, Stick/Tube, and IC Tray Packaging.

 

 

 

 

      Features  

l  Flying Vision for components from 0.6 mm x 0.3 mm (0201) to 16 mm x 14 mm. 

         ( 01005 chip 실장 0.2 x 0.3mm.  option   )

l      Bottom Vision Camera for alignment of 01005, up to 0.5 fine pitch QFP & BGAs (opt). 

l     32 lane feeder bases mount at left and right of system for max capacity of 64 automatic 8 mm tape Feeders. 

l     Optional feeders and accessories allow a wide variety of onfigurations for full and partial reels of Tape, strips of Cut Tape, Stick / Tube, and IC Tray Packaging. 

l Programming via CAD Conversion, Direct Input, or Teaching /Fiducial Recognition Camera. 

l     PC controller, monitor, and keyboard included with Easy-to-Use, Windows® XP-based control software. 

l      Conversion Optional Solder Paste Dispensing system.

 

   DETAILS

Strong and rigid mechanical design
BA281 using welded steel frame which guaranteed a strong and rigid mechanical design. Preloaded Ball Screws with Servo Motor system provides high Speed, Repeatability and Stability.

Non-contact Linear Encoder System (Option)
By using „Closed Loop“ Servo Motors with non-contact Linear Encoder System, rovide extremely high Repeatability and Stability.

COGNEX® Alignment System "Vision on the Fly"

The BA281 feature COGNEX® vision processing and head-mounted for non-contact „Vision on the Fly” alignment. The machine BA281 assures high-precision placement of the full range of SMDs, from the smallest 0201 devices through CSPs, µBGAs, flip-chips, ultra-fine pitch 0.3mm for QFPs, even odd-form components.

Feeder Rack (FR-32K)

FR-32K is suitable for 32 x 8 mm KFTA Feeders or for 30 x 8 mm IC-Sticks (1x KFTB-2 / 1x KFTB-4).

Bottom Vision Alignment System(Opt)
A Bottom Vision Camera is used for large components up to 150 x 100 mm and devices with alignment features on their bottom side. Due to additional Bottom Vision Camera, the alignment of 01005 components is guaranteed.

Smart Fiducial System
Beside the standard fiducial mark, either square SMD PCB pad or plate-through hole also can be trained as fiducial mark. For more precise placement of fine pitch components, additional Local fiducial recognition is provided.

Universal CAD Conversion

Beside the direct input of data by teach-in camera, an optional CAD conversion program is available for directly transfer of CAD generated pick and place data.

Auto Tape Feeder (KFTA)
The innovative design of KFTA feeder bases and mounting hardware allows almost limitless flexibility in feeder combinations and arrangement schemes, as almost every feeder can be ordered, loaded, programmed and mounted independently. KFTAs are available from 8 mm up to 72 mm tape width.

Universal IC Tube Feeder
KFTB universal tube feeder are using vibration driven technique. It is able to handle IC-Sticks with max.50 mm width.

Cut Strip Tape Holders (Short tape Staion)
Cut Strip Tape Holders is a handy accessory for present-ing components that are supplied in short lenghts of tape due to their low quantity of usage. It can also prevent the waste of components in sections of tape that are too short to be loaded into tape feeders.

Dispenser System
Optional stand alone dispenser head for adhesive & solder paste dispensing. Perfect for quick, small volume production without making stencil. ( 1 Dispenser )

Conveyor System

The already included conveyor system with SMEMA Interface and motor-driven-width-control speeds up the handling of PCB and in-line production.

Buffering Nozzle

The spring buffering design of Nozzle adjust the placement pressure for different heights of components automatically

Vision Inspection
With the built-in software, the camera can automatically move and display the image in the computer screen. User can manually check the printing accuracy of solder paste, quality of the soldering, accuracy of component placement, etc

Remote Service Kit

Optional Remote Service Kit allows a remote access to machine by Internet, so that programming, calibration and service can be done by our worldwide remote service center.

 

 

 

 

 

 

           사진 설명

 

01005 Chip 실장 가능

기본 Fly Vision

Off line / In line 구성

Under Vision Camera

2개의 티칭 Camera

Auto Nozzle 교환 흑/백 Nozzle . Station

고 해상도 티칭 Camera를 통하여 정밀 실장 가능

정밀도가 우수한 독일의 Autotronik-SMT GmbH 기술

Nozzle 자동 크린 기능으로 보다 정밀한 실장 가능.

Under Vision Camera

Feeder bank 4 면체에 부착 가능

Smart Feeder로 정밀하고 안정적인 SMD 공급

 

Application 참고 하세요

 

Skype Me™! Chat with me