SMD bulk  taping manual and semi automatic

Taping Modul

In-Line integration, Standalone unit, Minimum footprint, Automated working cycle, Heat Activated

cover tape,

Pressure Sensitive Adhesive cover tape, Adjustable width, Side or Floor, Touch Screen Panel Operator terminal Intuitive setup,  Three color display,

Welding parameters separate for each side, Manual or electronic pressure regulator, Part presence sensor,  Various configuration available

본 SMD taping 장비의 특징은 8. 12. 16. 24. 32. 44. 56mm up to 72mm을 taping을 할 때.  Taping Module 교환

으로 다양한 taping을 할 수 있는 것이 특징이다

Touch Screen Operation
	Basic information display: counter, current/set temperature and working mode. Three colour backlight signalizing machine state
	1) Green		normal operation
	2) Orange		warning (limited operation)
	3) Red		malfunction (stopped)
	Setup menu provide settings as:      Temperature adjustment  Pitch adjustment  welding type      Time .cycle Trailer/Fill in/ Leader quantity and many more …
Stepper Drive
	Stepper motor with encoder closed loop provide highly accurate positioning and automatic error correction in case of tape blockage. Positioning resolution 0,01mm.   Easy load tape procedure enable lift-up sprocket wheel cover Dual drive for double sprocket carrier tapes.
Heater block & Welding
	Fast exchangeable heater block.   Welding position set with positioning screw (optional micrometer) Protection for hot areas.   Adjustable temperature and welding pressure for each heater block. Continuous and Step weld mode. Suitable also for PSA cover tapes

Cover Tape Guide Rollers
	Lift up system help operator to set the cover tape easily.   Cover tape position adjustment integrated on the guide roller. With turning the wheel operator can fine adjust position of the wheel. Fast changeable guide rollers for different cover tape width.
Cover Tape End / Near End Function
	Intelligent sensing technology allows operator warnings according to the minimum required cover tape length.    When cover tape run out the machine automatically stop. Constant tension of cover tape is provided by innovative design of tension mechanism.
Part Presence Detection
	Part presence sensor integrated.   In combination with working mode detects cavity status (filled, empty). In case of nonconformity stops the machine and warn the operator.   Optional vision checker for orientation detection.
Adjustable Width
	All units have adjustable width, while fixed units have possibility of micro adjustment according to the carrier tape tolerance, variable units can be adjusted for all types of carrier tapes.    Adjustment width depend on the model.
Technical Data
	Tape width		8-200mm
	Tape pitch		2-72mm
	Max pocket depth		40mm
	Temperature control		Dual control with Digital readout 30°C~250°C
	Electrical supply		230VAC, 2A 24VDC, 4A
	Compressed air supply		6bar, 10l/min
	I/O signals		Ext. Start (Input 24VDC, active high)
	Ready (output 24VDC, active High
	Weight		9kg

Mounting은 2종류 : Fllor / Side

opton

1. Elongation 250mm
2. liner
3. inverted
4. configuaration
5. rewinding : normal type / Big size type
6. Unwinding : single reel . cross winding